Repair Guides - Page 2 of 12

Guide

Saeco Xelsis Coffee Not Hot Enough: Cup, Settings or Milk?

Compare a prewarmed cup, the selected drink’s temperature and milk addition before assuming your Xelsis needs a heater repair.

Guide

Already emptied your JURA E8? Check the power-on grounds counter, tray seating and maintenance prompts before assuming a failed sensor.

Guide

Compare open-group water flow with the slow shot, then inspect the basket, grind, dose and water path in that order.

Guide

Run the Magnifica Evo's automatic Clean step after a milk drink, then thoroughly wash the carafe within the manufacturer's interval.

Guide

Clean the BES870 basket and portafilter after use; use the supplied pin and a tablet soak only if holes remain blocked.

Guide

Rinse the removable Xelsis brew group weekly and run the separate monthly coffee-oil cleaning program.

Guide

If E8 foam is weak or spraying, rinse the detached frother pieces and milk pipe; reassemble every connection securely.

Guide

Replace the E8 filter when prompted: reuse its extension, lock the cartridge into the tank and allow automatic rinsing.

Guide

Clean the two-part LatteGo milk container after every use and check its connection if milk flow remains weak.

Guide

Replace and prime the Magnifica Evo ECAM29x water softener filter, then register it through the settings menu.